Mowing and collection in a single pass
Collects clippings, leaves, and light lawn debris while mowing.
PUDU · Robotic lawn mowers
PUDU GT5
Mowing and collection in a single pass across large grassy areas
An autonomous robotic solution for mowing and collection across large commercial lawns.
Features that streamline field workflows
Automatic emptying and task resumption
When the bin is full, it travels to the dumping point and resumes operation from the marked location.
Long operating time
Supports long operating cycles on a single charge.
Automatic mapping and quick setup
Autonomously explores the work area to create a map.
Autonomous movement between zones
Moves between different lawn sites via pre-mapped internal routes.
360° situational awareness
Combines RGB, RGBD, and LiDAR data for environmental perception.
Mowing and collection in a single pass
GT5 simultaneously vacuums and collects grass clippings, fallen leaves, and light field debris while mowing large areas with its rotary blade, reducing the need for cleanup afterward.
Empties and resumes where it left off
When the bin is full, GT5 travels to the dumping point; it then returns to where it left off in the task and continues mowing.
For long grounds cycles
The manufacturer reports up to 8–10 hours of operation and coverage of up to 65.000 m² on a single charge, depending on operating conditions.
8–10 h
Operating time
Reported range on a single charge.
65.000 m² / 16 acres / 6,5 ha
Area per charge
Maximum area listed on the manufacturer's product page.
Wide-area mowing with a 152 cm cutting width
The 60-inch (1,52 m) rotary cutting deck and a target mowing rate of 2 acre/h are designed to speed up daily workflows across large lawns.
60 in (1,52 m)
Cutting width
Cutting measurement listed on the product page.
2 acre/h / 8.000 m²/h
Mowing rate
Target productivity specified by the manufacturer.
Autonomous transitions between grass areas
Moves between different sites or lawn areas via pre-mapped internal routes and resumes mowing upon arrival, reducing the need for manual transport.
Automatic mapping and quick deployment
GT5 autonomously explores the work site to create operational maps. Defining geofences for target areas using online or satellite imagery reduces the need to manually map the site perimeter.
Precisely follows edges
High-precision positioning enables GT5 to maintain its mowing line up to 5 cm from edges, reducing uncut strips.
5 cm
Edge distance
Mowing precision specified by the manufacturer.
360° environmental sensing
Environmental vision combines RGB, RGBD, and LiDAR data to help GT5 continuously perceive its work area.
Detects obstacles and responds safely
Recognizes pedestrians, vehicles, hoses, and site features such as poles; it slows down, moves around them, or stops depending on the level of risk.
Protection against hazardous drops
Detects drop-off hazards such as watersides, steps, and steep slopes; together with defined no-go zones, it changes route or applies the brakes.
Metal chassis designed for commercial use
Its all-metal chassis is designed for the rigors of daily commercial use. The manufacturer specifies an IP66 rating to protect internal components from rain and moisture.
IP66
Ingress protection rating
Weather-resistance class specified by the manufacturer.
Technical specifications
Key dimensions and performance figures published by the manufacturer on the GT5 product page.
| Dimensions (L×W×H) | 1910 × 1586 × 1293 mm / 75.2 × 62.44 × 50.91 in |
|---|---|
| Weight (including batteries) | 850 kg / 1873.93 lb |
| Cutting width | 60 in (1,52 m) |
| Cutting height | 26 mm–152 mm / 1–6 in |
| Mowing rate | 2 acre/h / 8.000 m²/h |
| Maximum mowing speed | 11 km/h / 6.7 mph / 3 m/s |
| Maximum slope – mowing | 20° |
| Battery capacity | 26 kWh |
| Operating time | 8–10 h |
| Area per charge | 65.000 m² / 16 acres / 6,5 ha |
| Charging time | Standard: 8 h (3 kW); optional fast charging: 4 h (6 kW) |
Evaluate GT5 for your site
Contact Robotik Çözümler for availability and demo options.