Precision positioning
RTK, LiDAR, and vision systems work together.
PUDU · Robotic lawn mowers
PUDU GT7
Precision autonomous reel mowing on professional grounds
An autonomous reel mower with precision cutting for professional turf fields.
GT7’s key capabilities
Controlled strip mowing
Cutting angle, turning direction, and strip offset are configurable.
Transitions between areas
Automatic travel between sites along pre-mapped routes.
Wide cutting, agile movement
Operates in complex site layouts by following narrow, winding paths.
Four-wheel drive
Designed for traction on sloped and undulating lawns.
Long operating time
Operation across a large field area on a single charge.
Quiet electric operation
When collection is not in use, the suction motor can be switched off for quieter mowing.
Floating cutting units
The three cutting units independently follow the ground contour.
Centimeter-level positioning
Combining RTK, LiDAR, and vision perception, GT7 follows a consistent route during automatic mowing tasks with ±2.5 cm RTK accuracy.
Field-standard mowing pattern
The cutting angle, turning direction, and strip spacing are adjustable; automatic route planning aims to create neat lines on professional fields.
Wide mowing, agile in narrow passages
While the 62-inch triplex cutting unit supports efficient operation over large areas, the robot can travel along narrow, winding paths.
Long shifts, quieter operation
The electric chassis supports quiet operation; in no-collection mode, the suction motor can be switched off.
12 hours
Maximum operating time
The specified maximum time on a single charge.
17 acre
Maximum coverage area
The specified area covered on a single charge in no-collection mode.
Mowing or collection mode
Depending on conditions, standard mowing or active grass collection can be selected. During collection, bin-full detection and the ability to resume the task from where it left off are specified.
Powerful collection with dual fans
Grass clippings, fallen leaves, and light debris are collected in the bin by a dual-fan vacuum system.
Three units that follow the ground contour
Independent floating cutting units help maintain a more consistent cutting height on undulating sports turf.
Senses its surroundings and adapts to obstacles
RGB, RGBD, ultrasonic sensors, and LiDAR provide environmental awareness. AI vision algorithms can recognize field boundaries, pedestrians, and vehicles, then apply stop, wait, or pass protocols.
Remote monitoring and quick height adjustment
Managers can remotely monitor location, task progress, and system status, and receive fault notifications. The adjustment knob allows the cutting height to be changed without tools.
Technical specifications
GT7 values published by the manufacturer.
| Dimensions (L×W×H) | 1950x1600x1400 mm / 76.8 × 63.0 × 55.1 in; 1950x1500x1400 mm / 76.8 × 59.1 × 55.1 in when raised |
|---|---|
| Weight (including batteries) | 900 kg / 1984 lb |
| Mowing speed/capacity | 2 acre/h; 8000 ㎡/h |
| Cutting width | 62 in / 1600 mm |
| Number of blades on each reel | 8 or 11 |
| Height of cut (HOC) | 5 ~ 50 mm / 0.197~1.97 in |
| Maximum mowing speed | 11 km/h / 6.7 mph / 3 m/s |
| Battery capacity | 26 kWh |
| Operating time | 10~12 h |
| Area per full charge | 70000 ㎡ / 17 acres / 7 ha |
| Charging time | Standard: 8 h (3 kW); optional fast charging: 4 h (6 kW) |
| Maximum slope – mowing | 30° |
Learn about PUDU GT7
Contact Robotik Çözümler for product and application details.