INDUSTRIAL & LOGISTICS ROBOTS · BMR

BMR Facade Cleaning Robot MQ200

Fully automatic robot that autonomously cleans facades up to 200 m high.

BMR MQ200 provides fully automated cleaning of glass, metal, and stone-clad facades up to 200 m high. It offers integrated wastewater recovery, ground-based control with autonomous operation, and AI visual inspection.

Work capacity: ≥350 m²/hour · Cleaning output
Working width: 1.000 mm · Single pass
Working height: ≤200 m · Operating inclination 0-90°

Request a quote / demo

1 / 3

SELECT BY TASK

BMR Facade Cleaning Robot MQ200
what is it evaluated for?

BMR MQ200 is the facade cleaning robot in the BMR work-at-height series. With a body weighing under 80 kg, it uses a 220 V power supply, receives water from the ground, and operates on flat and highly curved glass, metal, and stone facades at inclinations of 0–90°. Its modular obstacle-crossing mechanism clears protrusions of up to 400 mm; a 1.000 mm cleaning width and precise route planning provide high coverage. AI visual inspection recognizes facade features and obstacles, optimizes cleaning parameters, and automatically generates a report at the end of the job. Redundant safety systems and a wastewater recovery unit ensure high safety and environmental compliance. Actual performance varies depending on facade material, surface curvature, type of dirt, wind, and existing suspension equipment; site surveys and project documents are assessed before commissioning.

Commercial office buildingsHotelsShopping mallsLandmark buildingsHighly curved glass facades

PRODUCT-SPECIFIC

Key features.

Features compiled from source product information; evaluate according to the model and configuration.

Ground-based control, autonomous operation at height

The operator controls the robot from the ground-based control unit; the robot operates autonomously on the facade and uses its AI vision system to assess obstacles and the level of cleanliness.

High-altitude capability

The ability to operate up to 200 m enables use on tall buildings with flat and highly curved facades.

Wide cleaning path

A 1.000 mm cleaning width and adjustable travel speed enable large facade surfaces to be cleaned in an economical amount of time with efficient overlap.

Obstacle-crossing mechanism

The modular mechanism clears facade protrusions of up to 400 mm, providing high coverage on flat and curved surfaces.

Redundant safety systems

The multi-layered safety design is supported by redundant mechanisms to reduce the risks of working at height.

Wastewater recovery

The integrated wastewater recovery unit collects used water and helps prevent secondary pollution of the environment.

Smart route planning and reporting

Its proprietary route-planning software automatically generates the operating route; a cleaning report is automatically produced after fully automated operation.

Flexible operating inclination

The ability to operate on inclines ranging from 0–90° enables it to work on vertical and sloped surfaces.

SOURCED PRODUCT DATA

Technical features.

Values are taken from the source product page. Confirm the package, software, and accessory contents against the manufacturer's current documentation before ordering.

BMR Facade Cleaning Robot MQ200 technical specifications
Feature	Value
Weight	≤80 kg
Operating capacity	Operating height ≤200 m; cleaning width 1.000 mm; productivity ≥350 m²/hour; coverage rate ≥%80; operating inclination 0-90°; obstacle clearance ≤400 mm
Maximum speed	0-0,2 m/s
Working width	1000 mm
Battery	220 V mains power supply; ground-based water supply
Operating voltage	220 V
Material	Flat and highly curved glass, metal, and stone-clad facades; modular obstacle-crossing mechanism; wastewater recovery unit
Manufacturer's note	Safety and operating mode: redundant safety system; combines manual control from the ground with autonomous operation at height, operates fully automatically, and automatically generates a cleaning report. AI vision recognizes wall features, obstacles, and the level of cleanliness; includes a wastewater recovery unit.
Sensors	Facade feature and obstacle recognition using an AI vision system; redundant safety sensors
Interfaces	Ground control unit; 220 V power supply and ground-based water line
Processor	AI visual inspection model; intelligent route planning; cleaning quality assessment; in-house developed route planning software
Software features	Three-part model combining ground-based operator control, autonomous operation at height, and AI inspection; precise cleaning parameter control; automatic cleaning reports; wastewater recovery
Protection rating	IP54

SEE THE PRODUCT IN ACTION

BMR Facade Cleaning Robot MQ200 introduction.

The introduction video linked from the source product page opens when you press the play button.

PRODUCT INFORMATION SOURCES

Sources and documentation.

This catalog is intended to help explore product information. No commitments are made on behalf of Robotik Çözümler regarding stock, authorized dealers, pricing, warranty, or after-sales service terms.

FREQUENTLY ASKED QUESTIONS

Frequently asked questions.

What types of façades can it work on?

Operates on flat and highly curved glass, metal, and stone curtain walls, as well as vertical and sloped surfaces. Modular obstacle traversal clears decorative projections up to 400 mm.

How are water and electricity supplied?

The robot runs on a 220 V power supply and draws water from the ground. The wastewater recovery unit collects used water; connection and supply arrangements are determined during the site survey.

Where is the operator positioned?

The operator stays at the ground-level control unit; the robot operates autonomously, while AI plans the route and allows cleaning progress to be monitored from the ground.

What factors affect actual performance?

Façade material, surface curvature, type of dirt, building structure, wind conditions, and existing suspension equipment affect actual cleaning efficiency; therefore, a site survey is conducted before commissioning.

IN THE SAME CATEGORY